Verifone P400 USB
•With the ipc3-app started and configured, connect the USB cable and wait for the device drivers to install.
•From an admin command prompt, run ipc-setup.bat select (n) when prompted if you want to change the host/port values.
•Select Option 8 from the list to let the application discover the P400 USB device.
•Once found, access the Engineering menu by pressing ‘1’ and ‘OK’ at the same time.
•Enter the ‘Password’ SE915074.
•For information on the device settings, refer to Payment Devices – Verifone P400.
Verifone V240m WIFI
For more detailed instructions or to connect via BlueTooth, refer to Payment Devices – Verifone 240m.
If you are prompted to enter a password when you boot up the device, enter the password 2345.
If this occurs, the Comm Mode menu appears. Select Wifi. then accept the default parameters.
•To access the Engineering menu on the device, press ‘1’ and ‘<’ at the same time.
•Enter the ‘Password’ SE915074.
•Modify the following settings:
1.Go to the Comms Setup->WiFi Config->Add WiFi Profile page.
2.Select your WiFi network.
3.Enter the WiFi password.
The Choose comm type page appears again.
4.From the Engineering main menu select TCP/IP Setup->Server/Client Mode->Client
5.Select: Host Setup->Add Host.
6.Enter the IP of the host machine and port 9080.
7.Press ‘X’ to navigate back to the main Engineering page.
8.Select Reboot.
The device can now be paired with the desired pay point
To enable receipt printing, simply ensure the device is loaded with paper
